features low forward voltage drop high current capability high reliability high surge current capability i deal for printed circuit boards mechanical dat a case:epoxy case with heat sink lnterally mounted in the bridge encapsulation terminals:plated leads soiderable per mil-std-202,method 208 polarity:as marked on body mounting position: bolt down on heatsink with silicone thermal compound between bridge and mounting surface for maximum heat transfer efficiency mounting torque:2 n qm maximum ratings and electrical characteristics rating at 25 ambient temperature unless otherwise specified. single phase, half wave, 60hz, resistive or inductive load.for capacitive load, derate current by 20% v oltage ratings characteristics symbol unit peak repetitive voltage v rrm working peak reverse voltage v rwm dc blocking voltage v r peak non-repetitive reverse voltage v rsm v rms reverse voltage v r(rms) v forward conduction characteristics symbol unit maximum average forward rectified current @t c =55 peak forward surge current t=8.3ms at 60hz i fsm a i2t rating for fusing i 2 t a 2 s reverse peak current v r =v rrm @t j =25 a v r =v rrm @t j =125 ma rms lsolation voltage from case to lead v iso v thermal characteristics operating temperature range t j storage temperature range t stg rev. 2, 16-mar-2017 50 a sbr50w -08 -14 -16 800 1600 1700 560 1400 dimensions in inches and (milimeters) i o i r v maximum forward voltage drop per element at 25a peak v f 1.2 500 1037.5 sbr50w series reverse voltage - 800 to 1600 volts forward current - 50 ampreres v three phase bridge rectifiers -10 -12 1000 1200 5 -55 to +150 2500 -55 to +150 3 840 980 1120 900 1100 1300 1500 700 sbr-w ? ~ ~ ~ + -
rating and characteristic curves sbr50w series the curve graph is for reference only, can't be the basis for judgment( ?)! rev. 2, 16-mar-2017 br10 br15 br25 br50 br35 fig.1-maximum forward surge current number of cyclets at 60hz peak forward surge current amperes 1 10 100 0 400 200 100 300 600 500 150 20 100 0 10 30 40 50 50 average forward output current , amperes fig.2- derating curve output rectified current case temperature,c instantaneous forward voltage,volts instantaneous forward current , amperes fig.3-typical forward characteristics 0.6 0.8 1.0 1.2 1.4 100 10 1.0 0.1 0.01 1.6 percent of rated peak reverse voltage instantaneous reverse current, microamperes fig.4-typical reverse characteristics 10 1.0 0.1 0.01 0 120 20 40 60 80 100 140 0.001 t j = 25 t j = 125
legal disclaimer notice all specifications and data are subject to be changed without notice to improve reliability function or design or other reasons. hy makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the co- tinuing production of any product. to the maximum extent permitted by applicable law, hy disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,consequential or incidental d- amages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merch- antability. statements regarding the suitability of products for certain types of applications are based on hy?s knowledge of typical require- ments that are often placed on hy products in generic applications. such statements are not binding statements about the suitabi- lity of products for a particular application. it is the customer?s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application.parameters provided in datasheets and specific- ations may vary in different applications and performance may vary over time. all operating parameters, including typical paramet- ers, must be validated for each customer application by the customer?s technical experts. product specifications do not expand or otherwise modify hy?s terms and conditions of purchase, including but not limited to the warranty expressed therein. except as expressly indicated in writing, hy products are not designed for use in medical, life-saving, or life-sustaining applicati- ons or for any other applications in which the failure of the hy product could result in personal injury or death. customers using or selling hy products not expressly indicated for use in such applications do so at their own risk.please contact authorized hy pers- onnel to obtain written terms and conditions regarding products designed for such applications. no license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of hy. product names and markings noted herein may be trademarks of their respective owners. ?????????? hy ???????????hy (i) ? ??????(ii) ???????(iii) ??? ???????? ????? hy ? hy ???????????? ???????????????? ????? ????????????? ??? hy ???? hy ???? ?hy ????? hy ??????? ?????? hy ????????hy ?? ? ? hy ??????????????????? ??? rev. 2, 16-mar-2017 disclaimer
|
